The straw on the Salomon flask can be cut to a shorter length to provide a custom fit for the user. Please follow the guide below.
Required Tools
- Scissors – should be of good quality and sharp
- Hot water and a coffee mug -Water temperature should be 170 F / 77 C
Step 1
Lay your flask out and have your cup of hot water ready.
Step 2
Disconnect the straw from the flask by twisting 45-degrees. The fitting will be attached to the end of the straw.
Step 3
Place the end into the hot water for 30 seconds.
Step 4
Reattach hose fitting to flask. Be careful as the tip will be hot. Then pull the tube from the flask. The tube will come off the fitting.
Step 5 – Cut to the desired length with scissors
Step 6- Place the tube end back into the hot water. Then press it onto the barb fitting.
Step 7 – Enjoy the shorter length and conquer your next run like a pro!