HydraPak reservoirs are top-rack dishwasher safe, and most turn inside out so they dry completely. Clean after each trip, and always dry fully before storing to prevent mold.

Elite, Force and Velocity

1. Reach inside, grab the bottom and pull it back out through the top opening, like turning a sock inside out. You can flip the molded opening too.
2. Wash on the top rack of the dishwasher, or by hand with warm water and mild soap.
3. Leave it inside out until completely dry.

Shape-Shift

1. Unlock the removable baffle.
2. Turn the reservoir inside out and wash on the top rack or by hand with mild soap.
3. Leave it inside out until completely dry.

Contour

The Contour turns inside out like our standard reservoirs, but its internal baffles don't separate. For the best clean, use a bottle brush, Bottle Bright tablets, or both.

• Brush: fill with warm water and a little mild soap, scrub with a bottle brush, rinse well.
• Bottle Bright: fill with warm water, drop in 1–2 tablets, close the slider and let sit 15–30 minutes. Rinse well.
• Dry: hang it inside out until completely dry.

Drink tube and bite valve

1. Disconnect the tube from the reservoir.
2. Pull the bite valve firmly off the end of the tube.
3. Slide the silicone sheath off the valve. Clean it with Bottle Bright or mild soap and water.
4. Scrub the inside of the tube with a HydraPak Tube Brush.
5. Let everything dry, then put the sheath back on the valve and the valve back on the tube.