1. Rinse with warm water and a small amount of mild soap. Run warm water through the bulb until the flow runs clear and has no traces of soap inside of it.
2. If soap and water is not enough, we recommend filling the nozzle with Bottle Bright dissolved in water, letting it soak for 15 minutes or more, then rinsing again with warm water until all of the cleaning tablet and water mix has been expelled. This should give your squeeze bulb the deepest clean possible without causing any damage to the materials.
*Note: Completely disassembly of the squeeze bulb is not required for cleaning. The assembly has some tight fitting parts that may break with improper removal. If you do choose to take the product apart for a deep clean, you will need to do so with great care as the product has a number of important seals and one way valves that can be compromised with incomplete or inaccurate assembly. When resembling, it is crucial to take great care to install one way valves so that they activate in the direction of the flow (see arrows on product) and that the silicone o-rings are placed on top of that valve are carefully installed so that they are fit snug between the valve cage and the inner wall of the thread on the bulb.